STAGE 2 CROW CAM AND CHIP PACKAGE TO SUIT HOLDEN BERLINA VS VT ECOTEC L36 3.8L V6

Product no.: CCP609-A
From NZ$985.00
Delivery Estimator Calculates delivery cost for this product


Key Benefits

  • Up to 20% horsepower gain
  • Street-friendly, tractable RPM range
  • ADR compliant

 

WHY

If you think you've gone as far as you can with bolt-on performance parts or are rebuilding your Holden V6, it's time to consider the benefits that only a high-performance Camshaft and Memcal package can bring.

 

WHAT

We have developed a series of high-performance Camshaft and Memcal packages for your Holden V6. Designed to deliver real-world horsepower gains of up to 25%, our Holden V6 cams won't compromise the drivability or fuel economy of your vehicle, like some cams can.

All our cam packages are new, so there is no need for change-over or deposit and we have packages to suit every model and transmission.

 

STAGE 2 PACKAGE: Improved Mid Range Power Touring

Our Stage 2 kit contains a new high-performance Camshaft and Memcal. We recommend this kit be used in conjunction with a full exhaust system, cold air intake, valvetrain upgrade and a tune post installation for maximum performance.

This package provides a maximum power gain of 20% between 1500 and 6000rpm. This increase has been achieved without sacrificing any noticeable low-end torque or drivability.

 

HOW

The camshaft is one of the most vital components inside your engine, controlling when and how the intake and exhaust valves open and close inside your cylinder heads directly affecting not only how much power you make, but where in the rev range it does it.

By altering the three main attributes to camshaft design being lift, duration and lobe-separation we've been able to offer a series of camshafts that provide maximum drivability and economy, whilst also offering up to 25% power gains!

 

Contents:

  • 1 X Crow Cams High performance camshaft
  • 1 X Tailor made memcal

Vehicle Fitment Guide

CCP609-613_fitment_guide_stage_2

 

Parts Guide

CCP609-613_Parts_guide_stage_2

 

NOTES:

  • Memcals in these packages are re-calibrated by Mace and we have strict guidelines in terms of what modifications our memcals support. Your setup's compatibility will be determined on the basis of filled out application form. In case of non-compatibility, you can either change your setup to a compatible one or we can supply you with the cam only. *CLICK HERE* to download the blank application form and send it back to info@maceengineering.com.au
  • We have all gaskets available through other ads.
  • Pushrod length will require checking if heads have been skimmed or block has been decked.
  • We recommend dialing in all aftermarket cams using a degree wheel to ensure that they’re phased correctly with the crankshaft. You can do this by using our 8" or 11" degree wheel listed in other ads.
  • Removing the timing cover may upset the sump gasket depending on certain models. We stock cork and metal sump gaskets if yours cannot be re-used.
Browse these categories as well: Holden, Berlina, VS, VT