MACE PERFORMANCE CAM AND COMPUTER PACKAGE TO SUIT HOLDEN ECOTEC L36 3.8L V6

If you think you've gone as far as you can with bolt-on performance parts or you are rebuilding your Holden V6, it's time to consider the benefits that only a high-performance camshaft and computer package can bring to the VX, VU and VY Ecotec L36 3.8L V6.

With the development of this package having taken place over a number of years, you can be assured that this is a solid one which will perform, whilst representing excellent value for money. For customers wanting a more aggressive cam package we've come up with computers to suit our range of mace cams, as shown below:

This cam and computer package is designed for use with totally stock heads, and stock valve train. Upgraded pushrods are recommended but not needed. Revving past 6200 RPM will require upgraded springs. Either 90 or 105# springs are recommended for high RPM use. This cam is designed for naturally aspirated applications where maximising the performance of stock heads is important. Idle is lumpy, especially with extractors. You can expect up to 19-26 kW gains depending on your car's current configuration.

Specifications:

• 216°/216° at 0.050"
• Intake Lift 0.317" (0.507" lift at 1.6:1 rocker ratio)
• Exhaust Lift 0.317" (0.507" lift at 1.6:1 rocker ratio)
• 111 LSA

Here is an example of how a stage 2 cam sounds on idle.

Here is an example of our Stage 2 cam and chip package in action (on a legal off-street burnout pad)

Contents:

• 1 X Camshaft
• 1 X PCM

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.

Notes:

• The images are for illustrative purposes only.
• For the 2000 build WH series, please check your vehicle if it is running memcal or computer before making a purchase. Cam and chip (memcal) packages for 2000 build WH series can be purchased through another listing. 
• Computers in these packages are re-calibrated by Mace and we have strict guidelines in terms of what modifications our computers support. Your setup's compatibility will be determined on the basis of filled out application form. In case of non-compatibility, you can either change your setup to a compatible one or we can supply you with the cam only. *CLICK HERE* to download the blank application form and send it back to info@maceengineering.co.nz