This Crow Cams valve spring and retainer set has been manufactured from aircraft quality alloy steel to give the best performance and reliability at a reasonable price.

These beehive valve springs and retainers are especially designed to suit Ford Falcons fitted with Boss 260 V8 engines.

Contents:

•  32 X Valve spring
•  32 X Retainer

Vehicle Fitment Guide

Valve Spring Specifications

Note: Use standard valve locks with this valve spring kit.

This Crow Cams valve spring set has been manufactured from a highly durable alpha one material to give the best performance and reliability at a reasonable price. These valves springs are a direct replacement product, designed for low to moderate boost street applications and can give up to 15 PSI of boost and 500 HP.

This valve spring set will suit FPV Force 6 and similar platforms fitted with a Barra 270T Turbo 4.0L I6 engines.

Contents:

• 24 X Valve spring

Vehicle Fitment Guide

Valve Spring Specifications

Notes:

•  Use standard valve locks and spring retainers with these valve springs.
•  Crow Cams valve spring and retainer kit suited for higher boost application can be purchased through another listing.

This Crow Cams valve spring set has been manufactured from a highly durable alpha one material to give the best performance and reliability at a reasonable price. These valves springs are a direct replacement product, designed for low to moderate boost street applications and can give up to 15 PSI of boost and 500 HP.

This valve spring set will suit Ford Falcons and similar platforms fitted with a Barra 4.0L I6 engines.

Contents:

• 24 X Valve spring

Vehicle Fitment Guide​

Valve Spring Specifications

Notes:

•  Use standard valve locks and spring retainers with these valve springs.
•  Crow Cams valve spring and retainer kit suited for higher boost application can be purchased through another listing.

This Crow Cams valve spring set has been manufactured from aircraft quality alloy steel to give the best performance and reliability at a reasonable price.

These beehive valve springs are specially designed to suit Ford Falcons fitted with the Boss 260 V8 engine.

Contents:

• 32 X Valve spring

Vehicle Fitment Guide

Valve Spring Specifications

Note: Use standard valve locks with this valve spring set.

This Crow Cams valve spring set has been manufactured from aircraft quality alloy steel to give the best performance and reliability at a reasonable price.

These beehive valve springs are specially designed to suit FPV vehicles fitted with the Boss 290 V8 engine.

Contents:

• 32 X Valve spring

Vehicle Fitment Guide

Valve Spring Specifications

Note: Use standard valve locks with this valve spring set.

This Crow Cams valve spring set has been manufactured from aircraft quality alloy steel to give the best performance and reliability at a reasonable price.

These beehive valve springs are specially designed to suit FPV vehicles fitted with the Boss 290 and 315 V8 engines.

Contents:

• 32 X Valve spring

Vehicle Fitment Guide

Valve Spring Specifications

Note: Use standard valve locks with this valve spring set.

This Crow Cams valve spring set has been manufactured from aircraft quality alloy steel to give the best performance and reliability at a reasonable price.

These beehive valve springs are specially designed to suit Ford Falcons fitted with Boss 260 and 290 V8 engines.

Contents:

• 32 X Valve spring (Refer to parts guide)

 Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.

Note: Use standard valve locks with this valve spring set.

This Crow Cams performance retainer set has been machined to exacting specifications so proper fit and guide clearance is achieved.

These retainers are made from "thru-hardened" 4140 chrome moly material and have been machined to give an extra 0.030” clearance to the valve stem seal. They’re engineered to work in conjunction with stock valve-train components and several other beehive type valve springs.

Contents:

• 16 X Crow Cams valve spring retainer

Vehicle Fitment Guide

This Mace valve cover gasket kit and Crow Cams conical valve springs with retainer and valve spring compressor tool have been put together to meet the requirements of Ford Falcons and similar platform fitted with Barra 4.0L I6 engines.

Crow Cams has carefully pieced together a basic valve spring & retainer kit to withstand the demands of extreme boost pressures and engine RPM, which is capable of handling up to 2.5 bar or 37 PSI of boost.

The Mace rocker cover gasket kit has been manufactured from high-grade automotive materials to ensure trouble-free motoring for all applications. Due to extended exposure to high temperatures, it is very common for the rocker cover gaskets on any motor to eventually become brittle and break. If the problem is left unattended, the engine bay ends up looking like a mess, the worst case, engine damage will result due to oil loss.

Our Australian fabricated compressor tool consists of a number of superior components; the main plate being manufactured from hardened mild steel while all the fasteners and washers are classed as high tensile. This is so you’re guaranteed a hassle free job whilst saving hundreds on labour costs.

Tool Loan:

The valve spring compressor tool is also available to be loaned out for $70, but we will also require a $300 bond. The bond will be fully refunded once the tool has been returned in complete working order within 30 days.

Contents:

• 01 X Valve/rocker cover gasket kit
• 01 X Mace compressor tool (refer to parts guide)
• 24 X Crow Cams conical valve spring
• 24 X Crow Cams retainer

Valve spring specifications

Vehicle Fitment Guide

Parts Guide

Notes:

• Use standard valve locks with the valve spring & retainer kit.
• This valve cover gasket kit and springs combo without retainers can be purchased through another listing.
• The conical valve spring with retainers kit, the rocker cover gasket kit and the valve spring compressor tool can be separately purchased through other listings.
• Performance camshafts for Barra 6 engines can be purchased through another listing.
• We recommend using air-holds or the top dead centre method to keep the valve in place while removing the spring.
• Please be cautious when removing the springs as the valve-locks are under a large amount of pressure which may cause them to turn into a projectile once they pop.

This Mace valve cover gasket kit and Crow Cams conical valve springs with retainer and valve spring compressor tool have been put together to meet the requirements of Ford Falcons and similar platform fitted with Barra 4.0L I6 engines.

Crow Cams has carefully pieced together a basic valve spring & retainer kit to withstand the demands of extreme boost pressures and engine RPM, which is capable of handling up to 2.5 bar or 37 PSI of boost.

The Mace rocker cover gasket kit has been manufactured from high-grade automotive materials to ensure trouble-free motoring for all applications. Due to extended exposure to high temperatures, it is very common for the rocker cover gaskets on any motor to eventually become brittle and break. If the problem is left unattended, the engine bay ends up looking like a mess, the worst case, engine damage will result due to oil loss.

Our Australian fabricated compressor tool consists of a number of superior components; the main plate being manufactured from hardened mild steel while all the fasteners and washers are classed as high tensile. This is so you’re guaranteed a hassle free job whilst saving hundreds on labour costs.

Tool Loan:

The valve spring compressor tool is also available to be loaned out for $70, but we will also require a $300 bond. The bond will be fully refunded once the tool has been returned in complete working order within 30 days.

Contents:

• 01 X Valve/rocker cover gasket kit
• 01 X Mace compressor tool (refer to parts guide)
• 24 X Crow Cams conical valve spring
• 24 X Crow Cams retainer

Valve spring specifications

Vehicle Fitment Guide

Parts Guide

Notes:

• Use standard valve locks with the valve spring & retainer kit.
• This valve cover gasket kit and springs combo without retainers can be purchased through another listing.
• The conical valve spring with retainers kit, the rocker cover gasket kit and the valve spring compressor tool can be separately purchased through other listings.
• Performance camshafts for Barra 6 engines can be purchased through another listing.
• We recommend using air-holds or the top dead centre method to keep the valve in place while removing the spring.
• Please be cautious when removing the springs as the valve-locks are under a large amount of pressure which may cause them to turn into a projectile once they pop.