This Mace premium valve regrind gasket set is designed to meet and exceed OEM specifications. Each item of this kit has been checked and evaluated, so you can be assured of quality fitment every time. This suits a range of Falcons and similar platforms fitted with 6 cylinder engines.

Contents:

• 01 x Head gasket
• 01 x Intake manifold gasket
• 01 x Exhaust manifold gasket
• 01 x Valve cover gasket
• 12 x Valve stem seal
• Other small gaskets & seals

Vehicle Fitment Guide

Notes: 

• The image is for illustrative purposes only.
• This kit only suits heads with 7mm valve stems.

This main cap girdle is designed to reduce "capwalk", stop block web flexing and eliminate cracking of the main caps/block webs; this is achieved by boxing in the main caps. Our light weight girdle evenly distributes load and dampens harmonics by bolting the main cap studs together to create a super strong rectangular cage. The brace nearly doubles the main web support area in the engine. Securing the loose end of the main studs provides stability unequalled even by a 4-bolt mains set up.

In addition, due to the close proximity of the main stud girdle to the crankshaft and rods it also aids in stripping oil off of the crank, which in itself yields a net gain in HP.
Fabricated from 10mm thick high strength steel, these girdles are a must for high rpm/high horsepower applications where block rigidity is critical.

Contents:

• 1 X Steel main cap girdle

Vehicle Fitment Guide

Notes:

• This girdle does not fit AU type alloy sump without modification.
• Spacers from the OEM girdle must be re-used and modified to suit.
• Sump modifications may be required on some models. 
• Custom length main studs are required. These can be purchased from any authorized ARP dealer.

This main cap girdle is designed to reduce "capwalk", stop block web flexing and eliminate cracking of the main caps/block webs; this is achieved by boxing in the main caps. Our lightweight girdle evenly distributes load and dampens harmonics by bolting the main cap studs together to create a super strong rectangular cage. The brace nearly doubles the main web support area in the engine. Securing the loose end of the main studs provides stability unequaled even by a 4-bolt mains setup.

In addition, due to the close proximity of the main stud girdle to the crankshaft and rods it also aids in stripping oil off of the crank, which in itself yields a net gain in HP.

Fabricated from 10mm thick high strength aluminium, these girdles are a must for high rpm/high horsepower applications where block rigidity is critical.

Contents:

• 1 X Alloy main cap girdle

Vehicle Fitment Guide

Notes:

• Spacers from the OEM girdle must be re-used and modified to suit.
• May require sump modifications on some models.
• Does not fit AU type alloy sump without modification.
• Custom length main studs are required. These can be purchased from any authorized ARP dealer.
• The image is for illustrative purposes only

These hypatec pistons are manufactured using silicon alloy combined with T6 heat treatment for maximum durability, strength, damage and scuff resistance. Great for standard rebuilds or lightly modified setups.

This piston set suits Ford vehicles fitted with the MPFI SOHC I6 engine.

Contents:

• 6 X Piston

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.

Notes:

• The image is for illustrative purposes only.
• Pistons for remaining Ford models can be purchased through other listings.
• Piston rings are not included but can be purchased through other listings. 

NPR® (Nippon Piston Ring) was established in 1931 and have six manufacturing plants in Japan and a further 9 plants in USA, Europe and Asia employing 2310 staff. NPR® is recognized as a world leading manufacturer and is original equipment to major Japanese and European automotive companies.

NPR's unrivaled piston rings are manufactured to exacting specifications so proper fit and clearance is achieved. When it comes to enduring the extreme conditions that occur in the combustion chamber while performing such functions as sealing, heat dissipation and oil control, there's no better option than Nippon rings. Perfect for standard rebuilds and lightly modified vehicles.

Specifications:

• Piston ring width: 1.2 x 1.5 x 3.0mm
• Compression rings material: Phosphated
• Oil ring material: Chrome

Contents:

• 06 X Piston ring
• 12 X Compression ring

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.

Notes:

• These piston rings only suit EB Fairmont from 4/1992 onwards.
• Please refer to manufacturer’s specifications for the correct installation.
• The image is for illustrative purposes only.

Hastings® advanced engineering provides intricate compression ring and groove combinations that are motor engineered (matched) to meet the unique operating conditions for each particular engine.

Hastings® compression rings, together with Flex-Vent oil rings provide the ultimate piston ring set. Hastings® has perfected the piston ring development process beyond reproach. That’s why the worlds biggest engine manufacturers: Chrysler, Ford, GM and Honda all specify Hastings® as their piston ring of choice.

This piston ring set suits the Ford MPFI VCT 4.0L Straight 6 engines and similar platforms.

Specifications:

• Piston ring width: 1.5 x 1.5 x 3mm
• Top ring material: Cast

Contents:

• 1 X Hastings piston ring set

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.

Notes:

• Please refer to manufacturer’s specifications for the correct installation.
• The image is for illustrative purposes only.

This Timing cover gasket kit is a premium replacement designed to suit Ford Falcons and similar platforms fitted with 3.9L & 4.0L I6 engines. Quality fitment is guaranteed everytime!

Contents:

• 1 X Timing cover seal
• 1 X Head end seal
• 1 X O-ring
• 3 X Timing cover gasket

Vehicle Fitment Guide

Hastings® advanced engineering provides intricate compression ring and groove combinations that are motor engineered (matched) to meet the unique operating conditions for each particular engine. 

Hastings® compression rings, together with Flex-Vent oil rings provide the ultimate piston ring set. Hastings® has perfected the piston ring development process beyond reproach. That’s why the worlds biggest engine manufacturers: Chrysler, Ford, GM and Honda all specify Hastings® as their piston ring of choice.

This piston ring set suits the Ford VCT MPFI 4.0L Straight 6 engines and similar platforms.

Specifications:

• Piston ring width: 1.5 x 1.5 x 3mm
• Material: Molybdenum (Moly)

Contents:

• 1 X Hastings piston ring set

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilizing our vehicle fitment guide and parts guide.

Notes:

• These piston rings only suit EB Fairmont from 4/1992 onwards.

• Please refer to manufacturer’s specifications for the correct installation.
• The image is for illustrative purposes only.

Inspired and used within NASCAR, these premium Copper and Double Platinum spark plugs are for the enthusiasts with high performance applications in mind.

The new Autolite plugs ignite more gas and air mixture inside the cylinders to deliver better overall performance. The ignition is also more focused, which provides better and faster fuel combustion, optimizing the vehicles spark plug performance.

Contents:

• 6 X  Autolite Spark plug

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.

Notes: 

• You can contact us if you are unsure about fitment.
• Gap the new spark plugs as recommended in the above fitment guide or car owner's manual. Use a feeler gauge to measure the gap between the center and ground electrode. The gauge should pass through snugly but easily. If too lose or too tight, reset the gap.
• The images are for illustrative purposes only.

Dayco water pumps are designed to meet OEM specifications. From raw material to complete assembly, all quality components are controlled in-house. These water pumps convey exceptionally dependable execution.

A water pump is the core of the engine's cooling framework and a fundamentally vital component to guarantee its exact working. Dayco ensures that high standards are met for every part supplied. From raw materials through the finished product, every aspect is validated for quality assurance. Each water pump is assembled using programmable Logic Control (PLC), providing quality data during the manufacturing process.

This water pump kit suits Ford vehicles fitted with the I6 engines.

Key Features:

• Improved impeller design for better performance.
• Die-cast aluminum material for better durability and increased longevity.
• Unitized seals for better durability and leak protection.
• Follow TS16949 Quality standards throughout die casting, foundry, machining and assembly.
• Case-hardened roller bearing with a tough exterior and an interior that allows for flex without breaking.
• Each pump is 100% end of line leak tested to ensure better durability.
• Polymer pulley.
• Low friction seals.
• Dayco Automotive Water Pumps are warranted for a period of 2 years or 40,000 km.

Contents:

• 1 X Water pump
• 1 X Gasket
• 1 X O-ring 

Vehicle Fitment Guide

Note: This water pump kit would not suit early XG Ute and XG Van models as they run a different pump with a screw on viscous fan hub.