Hastings® advanced engineering provides intricate compression ring and groove combinations that are motor engineered (matched) to meet the unique operating conditions for each particular engine. 

Hastings® compression rings, together with Flex-Vent oil rings provide the ultimate piston ring set. Hastings® has perfected the piston ring development process beyond reproach. That’s why the worlds biggest engine manufacturers: Chrysler, Ford, GM and Honda all specify Hastings® as their piston ring of choice.

This piston ring set suits the Ford VCT MPFI 4.0L Straight 6 engines and similar platforms.

Specifications:

• Piston ring width: 1.5 x 1.5 x 3mm
• Material: Molybdenum (Moly)

Contents:

• 1 X Hastings piston ring set

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilizing our vehicle fitment guide and parts guide.

Notes:

• These piston rings only suit EB Fairmont from 4/1992 onwards.

• Please refer to manufacturer’s specifications for the correct installation.
• The image is for illustrative purposes only.

This Timing cover gasket kit is a premium replacement designed to suit Ford Falcons and similar platforms fitted with 3.9L & 4.0L I6 engines. Quality fitment is guaranteed everytime!

Contents:

• 1 X Timing cover seal
• 1 X Head end seal
• 1 X O-ring
• 3 X Timing cover gasket

Vehicle Fitment Guide

Inspired and used within NASCAR, these premium Copper and Double Platinum spark plugs are for the enthusiasts with high performance applications in mind.

The new Autolite plugs ignite more gas and air mixture inside the cylinders to deliver better overall performance. The ignition is also more focused, which provides better and faster fuel combustion, optimizing the vehicles spark plug performance.

Contents:

• 6 X  Autolite Spark plug

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.

Notes: 

• You can contact us if you are unsure about fitment.
• Gap the new spark plugs as recommended in the above fitment guide or car owner's manual. Use a feeler gauge to measure the gap between the center and ground electrode. The gauge should pass through snugly but easily. If too lose or too tight, reset the gap.
• The images are for illustrative purposes only.

Inspired and used within NASCAR, these premium Copper, Double Platinum and Iridium spark plugs are for the enthusiasts with high performance applications in mind.

The new Autolite plugs ignite more gas and air mixture inside the cylinders to deliver better overall performance. The ignition is also more focused, which provides better and faster fuel combustion, optimizing the vehicles spark plug performance.

Contents:

• 8 X Autolite Spark plug

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.

Notes:

• You can contact us if you are unsure about fitment.
• Gap the new spark plugs as recommended in the above fitment guide or car owner's manual. Use a feeler gauge to measure the gap between the center and ground electrode. The gauge should pass through snugly but easily. If too lose or too tight, reset the gap.
• The images are for illustrative purposes only.

Dayco water pumps are designed to meet OEM specifications. From raw material to complete assembly, all quality components are controlled in-house. These water pumps convey exceptionally dependable execution.

A water pump is the core of the engine's cooling framework and a fundamentally vital component to guarantee its exact working. Dayco ensures that high standards are met for every part supplied. From raw materials through the finished product, every aspect is validated for quality assurance. Each water pump is assembled using programmable Logic Control (PLC), providing quality data during the manufacturing process.

This water pump kit suits Ford vehicles fitted with the I6 engines.

Key Features:

• Improved impeller design for better performance.
• Die-cast aluminum material for better durability and increased longevity.
• Unitized seals for better durability and leak protection.
• Follow TS16949 Quality standards throughout die casting, foundry, machining and assembly.
• Case-hardened roller bearing with a tough exterior and an interior that allows for flex without breaking.
• Each pump is 100% end of line leak tested to ensure better durability.
• Polymer pulley.
• Low friction seals.
• Dayco Automotive Water Pumps are warranted for a period of 2 years or 40,000 km.

Contents:

• 1 X Water pump
• 1 X Gasket
• 1 X O-ring 

Vehicle Fitment Guide

Note: This water pump kit would not suit early XG Ute and XG Van models as they run a different pump with a screw on viscous fan hub.

Fuel caps are designed to seal your vehicle's fuel system to help prevent evaporation as well as contamination. This CPC fuel cap maintains pressure in the fuel system by a special valve in the cap that can also release pressure if it is too high.

This fuel cap meets the emission requirements and is an ideal replacement for worn out and missing fuel caps in Ford vehicles.

Contents:

•  1 X Fuel cap (Refer to the parts guide)

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.

Different radiator caps maintain your vehicle's cooling system at different pressures, altering the boiling point of the coolant so it is vital that the correct radiator cap is used to pressurize the cooling system. CPC radiator caps are expertly designed to maintain optimum pressure and also to prevent coolant loss. 

This radiator cap suits Ford Falcon vehicles fitted with VCT MPFI I6 or any other vehicle equipped with the same engine.

Specifications:

• Height: 27 mm.
• Outside diameter: 59 mm.
• Thread diameter: 39 mm.
• Pressure rating: 20 PSI, 138 kPa.

Contents:

• 1 X Radiator cap

Vehicle Fitment Guide

Notes:

• Please verify that your radiator cap matches the dimensions of the one in this listing prior to purchase.
• It is recommended that the radiator cap is changed every two years to maintain the optimal performance of the cooling system.

Oil caps should be replaced when they no longer seal properly and allow the oil to seep out from the engine. This CPC standard replacement oil cap has been precision designed to perfectly seal the opening used for filling up the engine oil. 

CPC offers a variety of standard and performance oil caps, ranging from metal and plastic standard replacement caps to metal coloured performance oil caps.

Specifications: 

• Height: 32mm.

• Outside diameter: 62mm.

• Thread diameter: 35mm.

Contents:

• 1 X Engine oil cap

Vehicle Fitment Guide

Note: Please verify that your engine oil cap matches the dimensions of the one in this listing prior to purchase.

Different radiator caps maintain your vehicle's cooling system at different pressures, altering the boiling point of the coolant so it is vital that the correct radiator cap is used to pressurize the cooling system. CPC radiator caps are expertly designed to maintain optimum pressure and also to prevent coolant loss.

This radiator cap suits Ford Falcon vehicles fitted with Windsor V8 or any other vehicle equipped with the same engine.

Specifications:

• Height: 27 mm.
• Outside diameter: 59 mm.
• Thread diameter: 39 mm.
• Pressure rating: 20 PSI, 138 kPa.

Contents:

• 1 X Radiator cap

Vehicle Fitment Guide

Notes:

• Please verify that your radiator cap matches the dimensions of the one in this listing prior to purchase.
• It is recommended that the radiator cap is changed every two years to maintain the optimal performance of the cooling system.

Head bolts play a vital role in the sealing of the combustion chamber, oil/coolant channels and ambient air. Therefore, we recommend our Mace cylinder head bolt set for the task. Having met and exceeded OEM specifications, these quality bolts are suited for standard and mildly modified applications. These are torque-to-yield (TTY) bolts which means they are designed to be tightened past their elastic limit, guaranteeing high and uniform clamping forces. Other benefits include pre-applied sealant to the threads eliminating the use of thread locker and no-retorquing is necessary after correct installation procedures have been followed.

Contents:

• 14 bolts, enough for one motor

Vehicle Fitment Guide

Notes:

• The image is for illustrative purposes only.
• When torquing up bolts, an accurate torque wrench or angle gauge will be required to achieve correct clamping forces.
• Please follow the torque specifications as recommended by the service manual.
• TTY bolts are only to be utilized once due to permanent elongation and safety concerns.