The variable valve timing (VVT) camshaft phaser is a sprocket that will alter its position in reference to commands from the PCM for variable valve timing. When this fails, the check engine light will illuminate, the vehicle may run rough, and experience a loss of power along with valve train noise. If this issue is not resolved within a timely manner, fuel economy will suffer and major engine damage may result.

This cam phaser, playing a vital role in engine performance and drivability, is engineered and manufactured under strict quality control procedures to restore power back to factory specifications and operate as intended. This is a direct fit replacement for all 3V Barra V8 engines.

Contents:

• 2 X Cam phaser
• 2 X Mounting bolt

Vehicle Fitment Guide

Notes: 

• The image is for illustrative purposes only.
• Single camshaft phaser can be purchased through another listing.

This Mahle timing cover gasket kit is an OE equivalent, standard replacement kit. It is manuafctured from molded rubber and provides finest possible sealing with no leakage at all.

This Timing cover gasket kit suits Ford Falcons and similar platforms fitted with Barra 220 230 V8 engines.

Contents:

• 1 X Crankshaft seal
• 1 X Sealant
• 3 X Timing cover gasket

Vehicle Fitment Guide

Note: VCT solenoid housing gaskets are not included.

This 25% Underdrive balancer kit increases horsepower by reducing parasitic power loss from driving engine accessories including alternator, power steering and air conditioning.

This kit includes Powerbond SFI Race harmonic balancer to give unbeatable strength and durability on the street or race track, a smaller diameter harmonic balancer which reduces inertia for faster engine acceleration and a full set of all metal NULINE heavy duty idler pulley with high speed bearings.

Contents:

• 1 X 25% Underdrive race performance balancer
• 1 X Flat idler/tensioner pulley

Vehicle Fitment Guide

Note: This kit is compatible with standard belt.

If your balancer is starting to wobble and is on its way out, Powerbond has a replacement available to suit your needs. From a standard replacement to a performance replacement for those that race their car or just want that little bit extra from their engine.

Powerbond OEM Replacement Balancer 

Powerbond OEM replacement balancers feature the strength and durability of bonded dampening rubber at a price point attractive to all. Unlike cheap Asian sourced OEM replacement balancers that use weak grey iron castings that are prone to cracking, all Powerbond OEM balancers feature strong SG Iron cast hubs for maximum strength.

To ensure smooth operation all Powerbond OEM replacement balancers are dynamically balanced at the factory. With a unique combination of high strength castings, bonded dampening rubber and dynamic balance, the Powerbond OEM range is not only the ultimate standard replacement balancer but also perfect for budget.

Powerbond Street Performance Balancer

The Powerbond Street series brings bonded balancer technology within the budget. Powerbond Street balancers are also perfect for limited spec race classes such as late model stock that require an OEM style balancer. The bonded dampening rubber in every Powerbond Street series balancer eliminates spinning and component separation giving reliable performance in engines used to 6500rpm. 

Powerbond Street series combines new high strength SG (Nodular) Iron balancer centers with new inertia rings, bonded then balanced to extremely tight tolerances. All Powerbond Street balancers feature easy to read permanently etched timing marks on the outer ring.

Powerbond Race Performance Underdrive Balancer

The Powerbond Underdrive balancer produces more horsepower by reducing parasitic power loss from driving engine accessories including alternator, air conditioning, water pump and power steering at high engine RPMs. 

This small and light weight harmonic balancer sharpens throttle response and allows the engine to rev out faster.

Specifications:

• Type: 6PK

Contents:

• 1 X Harmonic balancer

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.

This Mace Torque-Lock limited slip differential (LSD) uses a sophisticated design to provide a quiet, automatic splitting of torque. It performs like an open differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. 

The advantage of the limited-slip differential design is apparent when comparing it to the standard or "open" diff. In vehicles with this older style of diff when one wheel began to slip or lose contact with the ground the slipping or non-contacting wheel would still receive the majority of the power whilst the contacting wheel remains stationary with the ground.

This issue is completely resolved with the Torque-Lock LSD. Harnessing a similar configuration to the Harrop and Eaton Truetracs, the automatic torque biasing design makes it the perfect limited slip differential upgrade for any enthusiast that will be using their vehicle for either straight-line drag, circuit, off-road or tough street work.

The proven helical gear technology found in the Torque-Lock LSD eliminates the need for wearable parts, resulting in maintenance free traction recognized not only for its durability, but its smooth and quiet operation as well. The low cost and effective operation all make the Mace limited slip differential the ideal choice for performance vehicles.

Contents:

• 1 X Torque-lock lsd

Vehicle Fitment Guide

Notes:

• The image is for illustrative purposes only.
• This Torque Lock LSD does not suit Ford vehicles with non turbo 6 cylinder engines.

Autolite revolution HT spark plugs have been exclusively designed for the enthusiasts with high performance applications in mind. These plugs are one of the brand's most technologically advanced spark plugs which offer space-saving benefits of a 10mm plug with the durability of a 14mm plug, plus the fine wire design feature gives more focused ignition power and longer service life.

Key Features:

• Better heat transfer than a standard J-gap design.
• Easier installation because pre-gapped plugs do not require pre-adjustment.
• High stregnth shell to avoid breakge issues.
• Thread positioned above cylinder head seating for a more compressive seal.
• Robust ceramic tip, which reduces the chance of dielectric punctures.
• Nickel-plated shell for improved corrosion protection.​

Contents:

• 8 X Autolite Revolution HT spark plug​

Vehicle Fitment Guide

Notes:

• You can contact us if you are unsure about fitment.
• The spark plugs in this set have been pre-gapped.
• The images are for illustrative purposes only.

If you're looking at upgrading the performance of your vehicle without venturing into engine tear downs or expensive tuning packages, then you can't go past our upgraded differential gear sets. Focused on retaining an appetising affordability to performance ratio, installing a shorter differential ratio is probably one of the most noticeable performance modifications you can do without compromising driveability and compliance. 

Our Mace differential gear sets have undergone an extensive manufacturing process to ensure OEM-like fitment and durability in any application. The superior finish provides a more consistent, higher quality product as proven in our very own cars!

Contents:

• 1 X Diff gear set

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.

Notes:

• Speedo calibration is required post installation.
• The image is for illustrative purposes only.

Different radiator caps maintain your vehicle's cooling system at different pressures, altering the boiling point of the coolant so it is vital that the correct radiator cap is used to pressurize the cooling system. CPC radiator caps are expertly designed to maintain optimum pressure and also to prevent coolant loss.

This radiator cap suits Ford Falcon vehicles fitted with Barra & Boss V8 or any other vehicle equipped with the same engine.

Specifications:

• Height: 22 mm.
• Outside diameter: 71.5 mm.
• Thread diameter: 50 mm.
• Pressure rating: 17 PSI, 120 kPa.

Contents:

• 1 X Radiator cap

Vehicle Fitment Guide

Notes:

• Please verify that your radiator cap matches the dimensions of the one in this listing prior to purchase.
• It is recommended that the radiator cap is changed every two years to maintain the optimal performance of the cooling system.

Oil caps should be replaced when they no longer seal properly and allow the oil to seep out from the engine. This CPC standard replacement oil cap has been precision designed to perfectly seal the opening used for filling up the engine oil.

CPC offers a variety of standard and performance oil caps, ranging from metal and plastic standard replacement caps to metal coloured performance oil caps.

Specifications:

• Height: 39mm.

• Outside diameter: 56.5mm X 70mm.

• Thread diameter: 35.5mm.

Contents:

• 1 X Engine oil cap

Vehicle Fitment Guide

Note: Please verify that your engine oil cap matches the dimensions of the one in this listing prior to purchase.

This Mace cylinder head bolt set suits Ford Falcons and similar platforms fitted with Barra 220, 230 and Boss 260, 290 5.4L V8 engines.

Head bolts play a vital role in the sealing of the combustion chamber, oil/coolant channels and ambient air. Therefore, we recommend our Mace cylinder head bolt set for the task. Having met and exceeded OEM specifications, these quality bolts are suited for standard and mildly modified applications. These are torque-to-yield (TTY) bolts which means they are designed to be tightened past their elastic limit, guaranteeing high and uniform clamping forces.

Key Benefits:

• Reduced frictional variations in the bolt up procedure.
• Allowance for uncontrolled slight discrepancies in the final bolt position on fitment.
• Maintenance of constant clamp load during warm up and running conditions.

Specifications:

• M11 X 1.5 X 212mm

Contents:

• 1 X Complete head bolt set

Vehicle Fitment Guide

Notes:

• The image is for illustrative purposes only.
• When torquing up bolts, an accurate torque wrench or angle gauge will be required to achieve correct clamping forces.
• Please follow the torque specifications as recommended by the service manual.
• TTY bolts are only to be used once due to permanent elongation and safety concerns.