MACE ENGINEERING GROUP - WHERE PERFORMANCE MEETS RELIABILITY!
This set of 8 standard replacement ignition coils is designed to meet and exceed OEM specifications when it comes to performance and durability. Each ignition coil has been checked and tested so you can be assured of quality fitment every time. This suits a range of Commodores and similar platforms fitted with the 8 cylinder engines.
Vehicle Fitment Guide
Notes:
If you think you've gone as far as you can with bolt-on performance parts or are even rebuilding your late model V6, it's time to consider the benefits of our eagerly anticipated high-performance camshafts. The SIDI Mace cams are unmatched in quality and value compared to any other V6 engine modification. Providing gains of around 30rwkw with a proper dyno tune and a substantial torque increase across the entire rpm range, these cams unleash the full potential of the high feature V6.
These cams provide power gains of approximately 30rwkw between 1500 and 6000rpm on a naturally aspirated V6 with a cold air intake and full exhaust system. Despite the excellent performance characteristics of this grind, the engine remains tractable and responsive at low speed. Our billet cams even provide that choppy idle and the heart-throbbing symphony at wide open throttle that every enthusiast loves to hear.
These cams have been designed to work in conjunction with the factory valve-train and engine components, so you are not required to replace a thing. If you intend on revving your vehicle beyond the factory rev-limiter or adding a little boost, then we'd at least recommend our high-performance valve-spring kit and aftermarket timing chain set.
Some of our customers were happy to share their results and experience they had with our Mace Engineering camshaft set:
Holden VE Commodore SV6 3.6L V6 Mace cams idle clip:
Holden VF Commodore SV6 SIDI LFX 3.6L V6 (260rwkw) country drive:
Our cams in a Holden VF Commodore SV6 SIDI LFX 3.6L V6:
Our friends at SVS Auto Repairs and Dyno Tuning in Queensland had very successful results after they fitted a set of our cams in a Holden VF Commodore SV6 SIDI LFX 3.6L V6.
Dyno Report:
This VZ Commodore equipped with an Alloytec LE0 3.6L V6 made an impressive 396HP or 294kW at the rear wheels through a stock auto with a set of Mace Cams and a Raptor Supercharger Kit. Thats a power increase of 160%! This is a fantastic result and illustrates these cams work well in a boosted application as well as a naturally aspirated setup. The dynamometer result was achieved through the use of a Mainline, which generally read lower than their counterparts.
Contents:
Vehicle Fitment Guide
Notes:
KEY BENEFITS
WHY
If you think you've gone as far as you can with bolt-on performance parts or are rebuilding your Holden V6, it's time to consider the benefits that only a high-performance Camshaft and Memcal package can bring.
WHAT
We have developed a series of high-performance Camshaft and Memcal packages for your Holden V6. Designed to deliver real-world horsepower gains of up to 25%, our Holden V6 cams won't compromise the drivability or fuel economy of your vehicle, like some cams can.
All our cam packages are new, so there is no need for change-over or deposit and we have packages to suit every model and transmission.
STAGE 1 PACKAGE: Improved Torque and Economy Towing
Our Stage 1 kit contains a new Camshaft and Memcal; providing a power gain of 15% between 1000 and 5000rpm. Perfect for towing, normal driving, and highway cruising.
HOW
The camshaft is one of the most vital components inside your engine, controlling when and how the intake and exhaust valves open and close inside your cylinder heads directly affecting not only how much power you make, but where in the rev range it does it.
By altering the three main attributes to camshaft design being lift, duration and lobe-separation we've been able to offer a series of camshafts that provide maximum drivability and economy, whilst also offering up to 25% power gains!
Contents:
Vehicle Fitment Guide
Parts Guide
Please select from the drop down menu, the part number you require by utilising our fitment guide and parts guide.
NOTES:
Key Benefits
WHY
If you think you've gone as far as you can with bolt-on performance parts or are rebuilding your Holden V6, it's time to consider the benefits that only a high-performance Camshaft and Memcal package can bring.
WHAT
We have developed a series of high-performance Camshaft and Memcal packages for your Holden V6. Designed to deliver real-world horsepower gains of up to 25%, our Holden V6 cams won't compromise the drivability or fuel economy of your vehicle, like some cams can.
All our cam packages are new, so there is no need for change-over or deposit and we have packages to suit every model and transmission.
STAGE 2 PACKAGE: Improved Mid Range Power Touring
Our Stage 2 kit contains a new high-performance Camshaft and Memcal. We recommend this kit be used in conjunction with a full exhaust system, cold air intake, valvetrain upgrade and tune post installation for maximum performance.
This package provides a maximum power gain of 20% between 1500 and 6000rpm. This increase has been achieved without sacrificing any noticeable low-end torque or drivability.
HOW
The camshaft is one of the most vital components inside your engine, controlling when and how the intake and exhaust valves open and close inside your cylinder heads directly affecting not only how much power you make, but where in the rev range it does it.
By altering the three main attributes to camshaft design being lift, duration and lobe-separation we've been able to offer a series of camshafts that provide maximum drivability and economy, whilst also offering up to 25% power gains!
Contents:
Vehicle Fitment Guide
Parts Guide
Please select from the drop down menu, the part number you require by utilising our fitment guide and parts guide.
Notes:
Key Benefits
WHY
If you think you've gone as far as you can with bolt-on performance parts or are rebuilding your Holden V6, it's time to consider the benefits that only a high-performance Camshaft and Memcal package can bring.
WHAT
We have developed a series of high-performance Camshaft and Memcal packages for your Holden V6. Designed to deliver real-world horsepower gains of up to 25%, our Holden V6 cams won't compromise the drivability or fuel economy of your vehicle, like some cams can.
All our cam packages are new, so there is no need for change-over or deposit and we have packages to suit every model and transmission.
STAGE 2 PACKAGE: Improved Mid Range Power Touring
Our Stage 2 kit contains a new high-performance Camshaft and Memcal. We recommend this kit be used in conjunction with a full exhaust system, cold air intake, valvetrain upgrade and a tune post installation for maximum performance.
This package provides a maximum power gain of 20% between 1500 and 6000rpm. This increase has been achieved without sacrificing any noticeable low-end torque or drivability.
HOW
The camshaft is one of the most vital components inside your engine, controlling when and how the intake and exhaust valves open and close inside your cylinder heads directly affecting not only how much power you make, but where in the rev range it does it.
By altering the three main attributes to camshaft design being lift, duration and lobe-separation we've been able to offer a series of camshafts that provide maximum drivability and economy, whilst also offering up to 25% power gains!
Contents:
Vehicle Fitment Guide
Parts Guide
NOTES:
KEY BENEFITS
WHY
If you think you've gone as far as you can with bolt-on performance parts or are rebuilding your Holden V6, it's time to consider the benefits that only a high-performance Camshaft and Computer package can bring.
WHAT
We have developed a series of high-performance Camshaft and Computer packages for your Holden V6. Designed to deliver real-world horsepower gains of up to 25%, our Holden V6 cams won't compromise the drivability or fuel economy of your vehicle, like some cams can.
All our cam packages are new, so there is no need for change-over or deposit and we have packages to suit every model and transmission.
STAGE 1 PACKAGE: Improved Torque and Economy Towing
Our Stage 1 kit contains a new Camshaft and Computer; providing a power gain of 15% between 1000 and 5000rpm. Perfect for towing, normal driving, and highway cruising.
STAGE 2 PACKAGE: Improved Mid Range Power Touring
Our Stage 2 kit contains a new high-performance Camshaft and Computer. We recommend this kit be used in conjunction with a free-flowing exhaust system for maximum performance.
This package provides a maximum power gain of 20% between 1500 and 6000rpm. This increase has been achieved without sacrificing any noticeable low-end torque or drivability.
HOW
The camshaft is one of the most vital components inside your engine, controlling when and how the intake and exhaust valves open and close inside your cylinder heads directly affecting not only how much power you make, but where in the rev range it does it.
By altering the three main attributes to camshaft design being lift, duration and lobe-separation we've been able to offer a series of camshafts that provide maximum drivability and economy, whilst also offering up to 25% power gains!
Vehicle Fitment Guide
Parts Guide
Please select from the drop down menu, the part number you require by utilising our fitment guide and parts guide.
Notes:
This part is temporarily unavailable, we apologise for any inconvenience caused. Please contact us for further information.
Key Benefits
WHY
If you think you've gone as far as you can with bolt-on performance parts or are rebuilding your Holden V6, it's time to consider the benefits that only a high-performance Camshaft and Memcal package can bring.
WHAT
We have developed a series of high-performance Camshaft and Memcal packages for your Holden V6. Designed to deliver real-world horsepower gains of up to 25%, our Holden V6 cams won't compromise the drivability or fuel economy of your vehicle, like some cams can.
All our cam packages are new, so there is no need for change-over or deposit and we have packages to suit every model and transmission.
STAGE 3 PACKAGE: Improved Top End Power High Performance kit
This kit contains a new Stage 3 Camshaft, Memcal and Valve springs. To make full use of this cams capability, we recommend a light head work, a full exhaust system, cold air intake, valvetrain upgrade and tune post installation.
This package provides a maximum power gain of 25% between 1800 and 6300rpm. Despite the excellent high-performance characteristics of this package, the engine remains tractable and responsive at low speed. While a standard torque converter can be used on automatic-equipped vehicles, an 1800rpm stall converter will enhance acceleration.
HOW
The camshaft is one of the most vital components inside your engine, controlling when and how the intake and exhaust valves open and close inside your cylinder heads directly affecting not only how much power you make, but where in the rev range it does it.
By altering the three main attributes to camshaft design being lift, duration and lobe-separation we've been able to offer a series of camshafts that provide maximum drivability and economy, whilst also offering up to 25% power gains!.
Contents:
Vehicle Fitment Guide
Notes:
Key Benefits
WHY
If you think you've gone as far as you can with bolt-on performance parts or are rebuilding your Holden V6, it's time to consider the benefits that only a high-performance Camshaft and Memcal package can bring.
WHAT
We have developed a series of high-performance Camshaft and Memcal packages for your Holden V6. Designed to deliver real-world horsepower gains of up to 25%, our Holden V6 cams won't compromise the drivability or fuel economy of your vehicle, like some cams can.
All our cam packages are new, so there is no need for change-over or deposit and we have packages to suit every model and transmission.
STAGE 3 PACKAGE: Improved Top End Power High Performance kit
This kit contains a new Stage 3 Camshaft, Memcal and Valve springs. To make full use of this cams capability, we recommend a light head work, a full exhaust system, cold air intake, valvetrain upgrade and tune post installation.
This package provides a maximum power gain of 25% between 1800 and 6300rpm. Despite the excellent high-performance characteristics of this package, the engine remains tractable and responsive at low speed. While a standard torque converter can be used on automatic-equipped vehicles, an 1800rpm stall converter will enhance acceleration.
HOW
The camshaft is one of the most vital components inside your engine, controlling when and how the intake and exhaust valves open and close inside your cylinder heads directly affecting not only how much power you make, but where in the rev range it does it.
By altering the three main attributes to camshaft design being lift, duration and lobe-separation we've been able to offer a series of camshafts that provide maximum drivability and economy, whilst also offering up to 25% power gains!
Contents:
Vehicle Fitment Guide
Parts Guide
Please select from the drop down menu, the part number you require by utilising our fitment guide and parts guide.
Notes:
KEY BENEFITS:
Make an easy 280-290kW with a custom tune
Simple and reliable cooling of intake charge
Run higher boost levels more safely
Up to 150°C reduction in intake temps
Tough appearance of a front-mounted intercooler and chromed intake piping behind the front bumper
Comes with a lifetime warranty
WHY
Harness the full potential of your L67 supercharged V6 Commodore with this unique air-to-air intercooler adaptor plate.
Designed and manufactured in Australia through an intensive 18 month development process, our air-to-air intercooler adaptor plates offer an extremely efficient, reliable way to reduce intake temperatures; resulting in higher air flow and shorter lag time than some other forms of intercooling.
WHAT
Our new air-to-air intercooler plates are cast from automotive grade alloy and feature a 70mm inlet and outlet for maximum airflow (perfectly matching our 69mm ported throttle body), which is precision machined for perfect fitment and finish.
The plate is 52mm tall and fits between the factory blower and the blower manifold, clearing all obstacles within the standard engine bay; allowing for proper under-bonnet clearance.
Testing has shown intake temperatures to drop by as much as 150°C by using our adaptor plates, allowing you to run more boost, more safely - meaning more power and torque!
In fact, our testing has shown that it's easy to make between 280 and 290kW, simply through fitting our air-to-air intercooler adaptor plates together with a tune. This is over 65kW more than you could hope to make in a non-intercooled L67 application.
HOW
Used in conjunction with a front-mount intercooler, the adaptor plate receives the hot air from the supercharger, cycling it through the front-mount intercooler and back into the intake manifold mounted below. It's a simple, efficient and reliable intercooling option.
Fitment of the air-to-air intercooler adaptor plate is simple for a general mechanic or the more experienced DIY enthusiast in the home garage; however a custom tune of your vehicles ECU will be required.
We offer an optional fitment kit to make the installation of our L67 air-to-air intercooler adaptor a breeze, including all the bits you'll need to get moving. However, if you're planning a custom installation, you won't need to wear the additional cost for parts you're not going to need.
GET MORE
Our L67 air-to-air intercooler adaptor plates really are the gateway to supercharged V6 performance never before known.
With an easy 280-290kW achievable with the adaptor alone, 300kW+ is possible with further modifications and porting.
Vehicle Fitment Guide
Note: Optional L67 Air to Air Intercooler fitment kit can be purchased from another ad.
This is a standard replacement drive belt manufactured using EDPM rubber compound that resists cracking and offers increased durability over belts made from neoprene. This is replacement for a range of Holden vehicles fitted with Supercharged V6 engines.
Belt size: 6PK2845
Vehicle Fitment Guide
Note: Image is for illustrative purposes only.
We do New Zealand and International Shipping
* Orders typically take 3-5 business days to prepare and process prior to dispatch.
Phone: +64 4889 0457
info@maceengineering.co.nz
For more info click here.
© Copyright -