SAAS Trax series 4×4 differential breather kit is a must for 4wd vehicles that frequently wade through water. This kit has been designed to elevate the breathing ports in the differential, allowing the air inside them to contract due to being submerged in cool water, without water entering in them.
This breather kit has 2 ports for front and rear diffs and 2 ports for gearbox and transfer case if required.
Key Features:
Stops water entering your differentials, transmission and transfer case.
Billet machined aluminium manifold.
Rear mounted washable filters sit out of sight and away from the elements.
Universal compact design.
All ports are isolated and protected from contaminating the other in the event of mechanical failure or flow back.
Specifications:
Thread size: 1/8”BSP
Contents:
01 x Manifold Block
01 x M6 bolt x 35mm
01 x M6 washer
01 x 8mm polyethylene hose 12M length
02 x 8mm polyethylene hose (spring style) 2M length
02 x 1/8" BSP plug block off nut
04 x 8mm to 8mm push in joiner
04 x 8mm to 1/8" BSP elbow push in fitting
04 x 1/8" BSP brass filter (silencer)
06 x 8mm straight push in fitting
30 x cable ties
Fitting instructions
Vehicle Fitment Guide
Notes:
Full comprehensive fitting kit included.
Some vehicles may have a different thread size or factory breather style and may require an adaptor or custom made solution. Please check the thread sizes first before making a purchase.
Please make sure that the air filters in this kit are not obstructed in anyway as incorrect fitting can cause damage to the differential or gear box.
Once installation is complete, you should have some left over hose that can be used with the supplied hose joiner fittings to make an emergency repair kit, if needed when off-roading.
This AJUSA Valve regrind gasket set (VRS) is designed to meet and exceed OEM specifications. Each item of this set has been checked and evaluated, so you can be assured of quality fitment every time.
This VRS gasket set suits Mitsubishi vehicles fitted with 4M41T I4 engines.
Contents:
1 X VRS gasket set
Vehicle Fitment Guide
Note: A valve regrind gasket set to suit Pajero 4M41T till 2006 can be purchased through another listing.
Due to extended exposure to high temperatures, it is very common for the rocker cover gaskets on any motor to eventually become brittle and break. If the problem is left unattended, the engine bay ends up looking like a mess and the worst case results in engine damage due to oil loss.
This rocker cover gasket kit has been manufactured from high-grade automotive materials to ensure trouble-free motoring for all applications. It can be used with factory rocker cover of the 6G72, 6G74 or 6G75 V6 engine.
This VRS gasket set has been manufactured by one of the top leaders in OEM and high-performance gaskets. All gaskets included in this kit meet or exceed the original equipment specifications providing the finest sealing products available.
This VRS gasket set suits a range of Mitsubishi vehicles fitted with the 4D56T I4 engine.
Contents:
1 X VRS gasket set
Vehicle Fitment Guide
Note: The image is for illustrative purposes only.
A water pump is the heart of an engine's cooling framework and a crucial component to assure its exact working. NPW has been manufacturing the most reliable and finest quality water pumps in Japan for over 5 decades, which meets or even exceeds OE standards. They follows strict manufacturing guidelines and use OEM bearings and seals to ensure longer bearing life, reliable performance and exact fitment.
This water pump suits Mitsubishi vehicles fitted with the 4D56T Turbo I4 engine.
Contents:
1 X Water pump
Vehicle Fitment Guide
Note: The image is for illustrative purposes only.
A water pump is the heart of an engine's cooling framework and a crucial component to assure its exact working. NPW has been manufacturing the most reliable and finest quality water pumps in Japan for over 5 decades, which meets or even exceeds OE standards. They follows strict manufacturing guidelines and use OEM bearings and seals to ensure longer bearing life, reliable performance and exact fitment.
This water pump suits Mitsubishi vehicles fitted with G672 and G674 V6 engines.
Contents:
1 X Water pump
Vehicle Fitment Guide
Note: The image is for illustrative purposes only.
This Powerbond OEM replacement balancer features the strength and durability of bonded dampening rubber at a price point attractive to all. Unlike cheap Asian sourced OEM replacement balancers that use weak grey iron castings that are prone to cracking, all Powerbond OEM balancers feature strong SG Iron cast hubs for maximum strength.
Virtually all OEM replacement balancers use press inserted dampening rubber which is prone to spinning and dislocation in hi torque and serpentine belt applications. The bonded dampening rubber in Powerbond OEM sets the range apart. In push apart and torque tests the Powerbond OEM design has up to 4 times the strength of inserted balancers.
To ensure smooth operation all Powerbond OEM replacement balancers are dynamically balanced at the factory. With a unique combination of high strength castings, bonded dampening rubber and dynamic balance, the Powerbond OEM range is not only the ultimate standard replacement balancer but also perfect for budget.
This Powerbond harmonic balancer suits Mitsubishi vehicles fitted with 4G63 and 4G64 I4 engines.
Specifications:
Type: 4PK
Contents:
1 X Harmonic balancer
Vehicle Fitment Guide
Browse these categories as well:
Triton, MK, ML, MN
POWERBOND OEM REPLACEMENT HARMONIC BALANCER TO SUIT MITSUBISHI TRITON ML 4M41T TURBO DIESEL 3.2L I4
This Powerbond OEM replacement balancer features the strength and durability of bonded dampening rubber at a price point attractive to all. Unlike cheap Asian sourced OEM replacement balancers that use weak grey iron castings that are prone to cracking, all Powerbond OEM balancers feature strong SG Iron cast hubs for maximum strength.
Virtually all OEM replacement balancers use press inserted dampening rubber which is prone to spinning and dislocation in hi torque and serpentine belt applications. The bonded dampening rubber in Powerbond OEM sets the range apart. In push apart and torque tests the Powerbond OEM design has up to 4 times the strength of inserted balancers.
To ensure smooth operation all Powerbond OEM replacement balancers are dynamically balanced at the factory. With a unique combination of high strength castings, bonded dampening rubber and dynamic balance, the Powerbond OEM range is not only the ultimate standard replacement balancer but also perfect for budget.
This Powerbond harmonic balancer suits Mitsubishi vehicles fitted with the 4M41T Turbo Diesel I4 engine.