This stainless steel intake and exhaust valve set has been specifically designed to suit Ford Falcons and similar platforms fitted with the Barra I6 engines.

Specifications:

• Head diameter (Intake/Exhaust): 35.5mm/32.5mm.
• Stem diameter: 6.0mm.
• O/length (Intake/Exhaust): 122.85mm/105.75mm.
• Collet type: Triple groove.

Contents:

• 12 X Stainless steel intake valve
• 12 X Stainless steel exhaust valve

​Vehicle Fitment Guide

Notes:

• The image is for illustrative purposes only.
• A single/set of stainless steel intake or exhaust valves can be purchased through another listing.

The cause of an irregular misfire or a stumble under load may be due to a failed component of the ignition system. This Ignition service kit includes everything required to freshen up the ignition system on your Ford Barra 195, 270T or EcoLPi I6 engine.

Key Features:

• OEM replacement coils to work with all factory sensors.
• Spark plugs ignite more gas and air mixture inside the cylinders to deliver better overall performance.
• Best quality, low resistance & high suppression spiral wound copper alloy core ignition lead with secure stainless steel cap and plug fittings.

The coils in this kit come with a 3 year/100,000km parts only warranty.

Contents:

• 6 X Ignition coil
• 6 X Autolite Double platinum spark plug

Vehicle Fitment Guide

Notes:

• You can contact us if you are unsure about fitment.
• Gap the new spark plugs as recommended in the above fitment guide or car owner's manual. Use a feeler gauge to measure the gap between the center and ground electrode. The gauge should pass through snugly but easily. If too loose or too tight, reset the gap.
• The image is for illustrative purposes only.

Thermostats play a vital role in engine management. Thermostats can fail in 2 possible manners; open or close position. If stuck open, the engine's heater will operate at reduced efficiency for an extended period of time or if stuck shut, will cause your car's engine to overheat leading to costly repairs or ultimately “complete engine failure”.

Designed to OEM specifications, Dayco thermostats come with a heat sensing wax filled copper power pill that detects the coolant temperature in the engine. The Dayco thermostats amazing heat sensing power pill controls coolant flow from the radiator when the engine is cold to reach optimum operating temperature quickly. It then allows coolant to circulate through the engine when the operating temperature is reached to create the perfect temperature controlled engine environment.

This 91°C thermostat suits Ford Falcons and similar platforms fitted with the Barra 4.0L and MPFI I6 engines.

Contents:

• 1 X 91°C thermostat

Vehicle Fitment Guide

Note: Please verify that your factory thermostat matches the dimensions of the one in this ad prior to purchase.

For extreme bottom end strength and block rigidity, we now stock billet main caps to replace the cast, troublesome OEM caps. These caps are machined from billet 4140 high tensile steel and use all existing mounting points, rear seal and oil pump pickup. This main caps set comes with a high quality steel main cap girdle, which has been specifically designed to work with them.

This main caps and girdle kit suits Ford vehicles fitted with the I6 engines.

Contents:

• 1 X Billet steel main cap set
• 1 X Steel main cap girdle

Vehicle Fitment Guide

Notes:

• Due to the main caps being replaced, it is required that the engine should be line bored/tunnel bored.
• This main caps and girdle kit is compatible with OEM windage tray and sump.

This Mace valve cover gasket kit and Crow Cams conical valve springs with retainer and valve spring compressor tool have been put together to meet the requirements of Ford Falcons and similar platform fitted with Barra 4.0L I6 engines.

Crow Cams has carefully pieced together a basic valve spring & retainer kit to withstand the demands of extreme boost pressures and engine RPM, which is capable of handling up to 2.5 bar or 37 PSI of boost.

The Mace rocker cover gasket kit has been manufactured from high-grade automotive materials to ensure trouble-free motoring for all applications. Due to extended exposure to high temperatures, it is very common for the rocker cover gaskets on any motor to eventually become brittle and break. If the problem is left unattended, the engine bay ends up looking like a mess, the worst case, engine damage will result due to oil loss.

Our Australian fabricated compressor tool consists of a number of superior components; the main plate being manufactured from hardened mild steel while all the fasteners and washers are classed as high tensile. This is so you’re guaranteed a hassle free job whilst saving hundreds on labour costs.

Tool Loan:

The valve spring compressor tool is also available to be loaned out for $70, but we will also require a $300 bond. The bond will be fully refunded once the tool has been returned in complete working order within 30 days.

Contents:

• 01 X Valve/rocker cover gasket kit
• 01 X Mace compressor tool (refer to parts guide)
• 24 X Crow Cams conical valve spring
• 24 X Crow Cams retainer

Valve spring specifications

Vehicle Fitment Guide

Parts Guide

Notes:

• Use standard valve locks with the valve spring & retainer kit.
• This valve cover gasket kit and springs combo without retainers can be purchased through another listing.
• The conical valve spring with retainers kit, the rocker cover gasket kit and the valve spring compressor tool can be separately purchased through other listings.
• Performance camshafts for Barra 6 engines can be purchased through another listing.
• We recommend using air-holds or the top dead centre method to keep the valve in place while removing the spring.
• Please be cautious when removing the springs as the valve-locks are under a large amount of pressure which may cause them to turn into a projectile once they pop.

This Mace valve cover gasket kit, Crow Cams conical valve springs without retainer and valve spring compressor tool have been put together to meet the requirements of Ford Falcons and similar platform fitted with Barra 4.0L I6 engines.

Crow Cams exceptional valve springs can withstand the demands of extreme boost pressures and engine RPM and are capable of handling up to 2.5 bar or 37 PSI of boost.

The Mace valve/rocker cover gasket kit has been manufactured from high-grade automotive materials to ensure trouble-free motoring for all applications. Due to extended exposure to high temperatures, it is very common for the rocker cover gaskets on any motor to eventually become brittle and break. If the problem is left unattended, the engine bay ends up looking like a mess, the worst case, engine damage will result due to oil loss.

Our Australian fabricated compressor tool consists of a number of superior components; the main plate being manufactured from hardened mild steel while all the fasteners and washers are classed as high tensile. This is so you’re guaranteed a hassle free job whilst saving hundreds on labour costs.

Tool Loan:

The valve spring compressor tool is also available to be loaned out for $70, but we will also require a $300 bond. The bond will be fully refunded once the tool has been returned in complete working order within 30 days.

Contents:

• 01 X Valve/rocker cover gasket kit
• 01 X Mace compressor tool (refer to parts guide)
• 24 X Crow Cams conical valve spring

Valve spring specifications

Vehicle Fitment Guide

Parts Guide

Notes:

• Use standard valve locks with the valve springs.
• This valve cover gasket kit and springs combo with retainers can be purchased through another listing.
• The conical valve spring, the rocker cover gasket kit and the valve spring compressor tool can be separately purchased through other listings.
• Performance camshafts for Barra 6 engines can be purchased through another listing.
• We recommend using air-holds or the top dead centre method to keep the valve in place while removing the spring.
• Please be cautious when removing the springs as the valve-locks are under a large amount of pressure which may cause them to turn into a projectile once they pop.