A water pump is the heart of the engine's cooling system and a vitally crucial element to ensure its accurate functioning. Cheaper pumps in the market often cause issues like heat ageing of the elastomeric components, the potential boiling of the fluid film between the seal faces, incorrect shaft or bore concentricity, bearing radial or axial play or excessive vibration due to misalignment of belts, pulleys or a defective fan clutch.

With this premium water pumps, you can forget about ever having to face any such problems. This pump has been designed and engineered following strict manufacturing guidelines with the OE standard components so you can be assured of quality and fitment.

This water pump kit suits Holden vehicles fitted with Buick, Ecotec and L67 Supercharged V6 engines.

Contents:

• 1 X Water pump
• 1 X Gasket

Vehicle Fitment Guide

Parts Guide

KEY BENEFITS

• Up to 15% horsepower gain
• Street-friendly, tractable RPM range
• ADR compliant

WHY

If you think you've gone as far as you can with bolt-on performance parts or are rebuilding your Holden V6, it's time to consider the benefits that only a high-performance Camshaft and Memcal package can bring.

WHAT

We have developed a series of high-performance Camshaft and Memcal packages for your Holden V6. Designed to deliver real-world horsepower gains of up to 25%, our Holden V6 cams won't compromise the drivability or fuel economy of your vehicle, like some cams can.

All our cam packages are new, so there is no need for change-over or deposit and we have packages to suit every model and transmission.

STAGE 1 PACKAGE: Improved Torque and Economy Towing

Our Stage 1 kit contains a new Camshaft and Memcal; providing a power gain of 15% between 1000 and 5000rpm. Perfect for towing, normal driving, and highway cruising.

HOW

The camshaft is one of the most vital components inside your engine, controlling when and how the intake and exhaust valves open and close inside your cylinder heads directly affecting not only how much power you make, but where in the rev range it does it.

By altering the three main attributes to camshaft design being lift, duration and lobe-separation we've been able to offer a series of camshafts that provide maximum drivability and economy, whilst also offering up to 25% power gains!

Contents:

• 1 X Crow Cams High performance camshaft
• 1 X Tailor made memcal

Vehicle Fitment Guide

Parts Guide

Please select from the drop down menu, the part number you require by utilising our fitment guide and parts guide.

NOTES:

• Memcals in these packages are re-calibrated by Mace and we have strict guidelines in terms of what modifications our memcals support. Your setup's compatibility will be determined on the basis of filled out application form. In case of non-compatibility, you can either change your setup to a compatible one or we can supply you with the cam only. *CLICK HERE* to download the blank application form and send it back to info@maceengineering.com.au
• Pushrod length will require checking if heads have been skimmed or block has been decked.
• We recommend dialing in all aftermarket cams using a degree wheel to ensure that they’re phased correctly with the crankshaft. You can do this by using our 8" or 11" degree wheel listed in other ads.
• Removing the timing cover may upset the sump gasket depending on certain models. We stock cork and metal sump gaskets if yours cannot be re-used.
• We have all gaskets available through other ads.
• Stage 2 & 3 Cam and Chip package can be purchased through another listing.

Key Benefits

• Up to 20% horsepower gain
• Street-friendly, tractable RPM range
• ADR compliant

WHY

If you think you've gone as far as you can with bolt-on performance parts or are rebuilding your Holden V6, it's time to consider the benefits that only a high-performance Camshaft and Memcal package can bring.

WHAT

We have developed a series of high-performance Camshaft and Memcal packages for your Holden V6. Designed to deliver real-world horsepower gains of up to 25%, our Holden V6 cams won't compromise the drivability or fuel economy of your vehicle, like some cams can.

All our cam packages are new, so there is no need for change-over or deposit and we have packages to suit every model and transmission.

STAGE 2 PACKAGE: Improved Mid Range Power Touring

Our Stage 2 kit contains a new high-performance Camshaft and Memcal. We recommend this kit be used in conjunction with a full exhaust system, cold air intake, valvetrain upgrade and a tune post installation for maximum performance.

This package provides a maximum power gain of 20% between 1500 and 6000rpm. This increase has been achieved without sacrificing any noticeable low-end torque or drivability.

HOW

The camshaft is one of the most vital components inside your engine, controlling when and how the intake and exhaust valves open and close inside your cylinder heads directly affecting not only how much power you make, but where in the rev range it does it.

By altering the three main attributes to camshaft design being lift, duration and lobe-separation we've been able to offer a series of camshafts that provide maximum drivability and economy, whilst also offering up to 25% power gains!

Contents:

• 1 X Crow Cams High performance camshaft

• 1 X Tailor made memcal

Vehicle Fitment Guide

Notes:

• Memcals in these packages are re-calibrated by Mace and we have strict guidelines in terms of what modifications our memcals support. Your setup's compatibility will be determined on the basis of filled out application form. In case of non-compatibility, you can either change your setup to a compatible one or we can supply you with the cam only. *CLICK HERE* to download the blank application form and send it back to info@maceengineering.com.au
• Pushrod length will require checking if heads have been skimmed or block has been decked.
• We recommend dialing in all aftermarket cams using a degree wheel to ensure that they’re phased correctly with the crankshaft. You can do this by using our 8" or 11" degree wheel listed in other ads.
• Removing the timing cover may upset the sump gasket depending on certain models. We stock cork and metal sump gaskets if yours cannot be re-used.
• Stage 3 Cam and Chip package can be purchased through another listing.
• We have all gaskets available through other ads.

Key Benefits

• Up to 20% horsepower gain
• Street-friendly, tractable RPM range
• ADR compliant

WHY

If you think you've gone as far as you can with bolt-on performance parts or are rebuilding your Holden V6, it's time to consider the benefits that only a high-performance Camshaft and Memcal package can bring.

WHAT

We have developed a series of high-performance Camshaft and Memcal packages for your Holden V6. Designed to deliver real-world horsepower gains of up to 25%, our Holden V6 cams won't compromise the drivability or fuel economy of your vehicle, like some cams can.

All our cam packages are new, so there is no need for change-over or deposit and we have packages to suit every model and transmission.

STAGE 2 PACKAGE: Improved Mid Range Power Touring

Our Stage 2 kit contains a new high-performance Camshaft and Memcal. We recommend this kit be used in conjunction with a full exhaust system, cold air intake, valvetrain upgrade and tune post installation for maximum performance.

This package provides a maximum power gain of 20% between 1500 and 6000rpm. This increase has been achieved without sacrificing any noticeable low-end torque or drivability.

HOW

The camshaft is one of the most vital components inside your engine, controlling when and how the intake and exhaust valves open and close inside your cylinder heads directly affecting not only how much power you make, but where in the rev range it does it.

By altering the three main attributes to camshaft design being lift, duration and lobe-separation we've been able to offer a series of camshafts that provide maximum drivability and economy, whilst also offering up to 25% power gains!

Contents:

• 1 X High performance camshaft
• 1 X Tailor made memcal

Vehicle Fitment Guide

Parts Guide

Please select from the drop down menu, the part number you require by utilising our fitment guide and parts guide.

Notes:

• Memcals in these packages are re-calibrated by Mace and we have strict guidelines in terms of what modifications our memcals support. Your setup's compatibility will be determined on the basis of filled out application form. In case of non-compatibility, you can either change your setup to a compatible one or we can supply you with the cam only. *CLICK HERE* to download the blank application form and send it back to info@maceengineering.com.au
• Pushrod length will require checking if heads have been skimmed or block has been decked.
• We recommend dialing in all aftermarket cams using a degree wheel to ensure that they’re phased correctly with the crankshaft. You can do this by using our 8" or 11" degree wheel listed in other ads.
• Removing the timing cover may upset the sump gasket depending on certain models. We stock cork and metal sump gaskets if yours cannot be re-used.
• We have all gaskets available through other ads.
• Stage 3 Cam and Chip package can be purchased through another listing.

Key Benefits

• Up to 25% horsepower gain
• Street-friendly, tractable RPM range
• ADR compliant

WHY

If you think you've gone as far as you can with bolt-on performance parts or are rebuilding your Holden V6, it's time to consider the benefits that only a high-performance Camshaft and Memcal package can bring.

WHAT

We have developed a series of high-performance Camshaft and Memcal packages for your Holden V6. Designed to deliver real-world horsepower gains of up to 25%, our Holden V6 cams won't compromise the drivability or fuel economy of your vehicle, like some cams can.

All our cam packages are new, so there is no need for change-over or deposit and we have packages to suit every model and transmission.

STAGE 3 PACKAGE: Improved Top End Power High Performance kit

This kit contains a new Stage 3 Camshaft, Memcal and Valve springs. To make full use of this cams capability, we recommend a light head work, a full exhaust system, cold air intake, valvetrain upgrade and tune post installation.

This package provides a maximum power gain of 25% between 1800 and 6300rpm. Despite the excellent high-performance characteristics of this package, the engine remains tractable and responsive at low speed. While a standard torque converter can be used on automatic-equipped vehicles, an 1800rpm stall converter will enhance acceleration.

HOW

The camshaft is one of the most vital components inside your engine, controlling when and how the intake and exhaust valves open and close inside your cylinder heads directly affecting not only how much power you make, but where in the rev range it does it.

By altering the three main attributes to camshaft design being lift, duration and lobe-separation we've been able to offer a series of camshafts that provide maximum drivability and economy, whilst also offering up to 25% power gains!.

Contents:

• 1 X Crow Cams High performance camshaft
• 1 X Tailor made memcal
• 12 X Valve spring

Vehicle Fitment Guide

Notes:

• Memcals in these packages are re-calibrated by Mace and we have strict guidelines in terms of what modifications our memcals support. Your setup's compatibility will be determined on the basis of filled out application form. In case of non-compatibility, you can either change your setup to a compatible one or we can supply you with the cam only. *CLICK HERE* to download the blank application form and send it back to info@maceengineering.com.au
• Pushrod length will require checking if heads have been skimmed or block has been decked.
• We recommend dialing in all aftermarket cams using a degree wheel to ensure that they’re phased correctly with the crankshaft. You can do this by using our 8" or 11" degree wheel listed in other ads.
• Removing the timing cover may upset the sump gasket depending on certain models. We stock cork and metal sump gaskets if yours cannot be re-used.
• We have all gaskets available through other ads.
• Stage 1 & 2 Cam and Chip package can be purchased through another listing.

Key Benefits

• Up to 25% horsepower gain
• Street-friendly, tractable RPM range
• ADR compliant

WHY

If you think you've gone as far as you can with bolt-on performance parts or are rebuilding your Holden V6, it's time to consider the benefits that only a high-performance Camshaft and Memcal package can bring.

WHAT

We have developed a series of high-performance Camshaft and Memcal packages for your Holden V6. Designed to deliver real-world horsepower gains of up to 25%, our Holden V6 cams won't compromise the drivability or fuel economy of your vehicle, like some cams can.

All our cam packages are new, so there is no need for change-over or deposit and we have packages to suit every model and transmission.

STAGE 3 PACKAGE: Improved Top End Power High Performance kit

This kit contains a new Stage 3 Camshaft, Memcal and Valve springs. To make full use of this cams capability, we recommend a light head work, a full exhaust system, cold air intake, valvetrain upgrade and tune post installation.

This package provides a maximum power gain of 25% between 1800 and 6300rpm. Despite the excellent high-performance characteristics of this package, the engine remains tractable and responsive at low speed. While a standard torque converter can be used on automatic-equipped vehicles, an 1800rpm stall converter will enhance acceleration.

HOW

The camshaft is one of the most vital components inside your engine, controlling when and how the intake and exhaust valves open and close inside your cylinder heads directly affecting not only how much power you make, but where in the rev range it does it.

By altering the three main attributes to camshaft design being lift, duration and lobe-separation we've been able to offer a series of camshafts that provide maximum drivability and economy, whilst also offering up to 25% power gains!

Contents:

• 1 X High performance camshaft
• 1 X Tailor made memcal
• 12 X Valve spring

Vehicle Fitment Guide

Parts Guide

Please select from the drop down menu, the part number you require by utilising our fitment guide and parts guide.

Notes:

• Memcals in these packages are re-calibrated by Mace and we have strict guidelines in terms of what modifications our memcals support. Your setup's compatibility will be determined on the basis of filled out application form. In case of non-compatibility, you can either change your setup to a compatible one or we can supply you with the cam only. *CLICK HERE* to download the blank application form and send it back to info@maceengineering.com.au
• Pushrod length will require checking if heads have been skimmed or block has been decked.
• We recommend dialing in all aftermarket cams using a degree wheel to ensure that they’re phased correctly with the crankshaft. You can do this by using our 8" or 11" degree wheel listed in other ads.
• Removing the timing cover may upset the sump gasket depending on certain models. We stock cork and metal sump gaskets if yours cannot be re-used.
• We have all gaskets available through other ads.
• Stage 2 Cam and Chip package can be purchased through another listing.

This standard replacement Mace oil pump kit suits all Commodores powered by the 3.8L Buick V6. It meets and exceeds all OEM specifications so you can be assured of quality fitment and performance every time. The Premium quality machine thinner oil pump cover available with this kit allows extra clearance for your double row timing chain kit with its precision ground finish and durable coating.

Contents:

• 1 X Oil pump cover (refer to Parts Guide)
• 1 X Oil pump internal gear
• 1 X Oil pump external gear
• 2 X Oil pressure relief valve
• 2 X Oil pump pressure relief spring
• 5 X Oil pump cover to timing cover bolt

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.

Note: The machine thinner oil pump cover screw torque is 11 N.m. It can also be separately purchased through another listing.

This pair of rocker cover gaskets perfectly seals the covers to the cylinder heads and meets all OEM specifications. These gaskets have been manufactured from high grade automotive materials to ensure trouble-free motoring for all applications.

Vehicle Fitment Guide

Exclusive to Mace Engineering, this performance cold air intake is a direct drop-in replacement for your existing air box assembly.

This cold air intake comes with a lifetime warranty.

Key Benefits:

• Design registered.
• Genuine bolt on product, which comes with everything required for installation.
• Utilises a hi-flow pod filter which offers superior flow characteristics compared to conventional panel filters.
• Huge cold air entrance, maximising the amount of air captured behind the headlight region.
• Made from a heat resistant extruded ABS plastic, ensuring your filter remains cool unlike other steel or aluminium enclosures on the market.
• Won't rust or discolour like powder coated or aluminium enclosures on the market.
• On road power gains of 5kW and more at the rears are not uncommon, depending on modifications.
• Improved drivability and throttle response.
• No dyno tuning required.
• Subtle, factory physical appearance.

Contents:

• 1 X Cold air intake enclosure
• 1 X Black cover
• 1 X Clear cover (Optional, see parts guide) 
• 1 X Hi-flow pod filter
• 1 X Bolt pack

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.
 

Notes: 

• Detailed fitting guide is available through the fitting instructions menu.
• Our pod filters are not oil based alleviating any concerns with coating the MAF with oil.

These King conrod bearings are ideal to meet and exceed OEM specifications when it comes to strength and durability. These are the premium replacement bearings to suit standard rebuilds and responsible for high performance.

These conrod bearings suit Holden vehicles fitted with Buick L27, Ecotec L36 and L67 Supercharged V6 engines.

Key Benefits:

• High strength overlay plate with reduced thickness for improved fatigue properties.

• Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing.

• Increased crush for improved bearing retention.

• Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximise the grip between the bearings and its housing.

• Increased eccentricity to compensate for bore distortion at high rpm and to assist in the formation of hydrodynamic oil films.

• 3/4 grooved Main Bearings to optimise bearing load carrying surface area and oil flow to the conrod bearings.

• Tight consistent wall tolerances to help you maintain consistent clearances.

 Vehicle Fitment Guide

Parts Guide

Please confirm which part number you require while checking out by utilising our parts guide.

Note: Conrod bearings for Buick V6 engines up to 10/1990 can be purchased through other listing.