Oil caps should be replaced when they no longer seal properly and allow the oil to seep out from the engine. This CPC standard replacement oil cap has been precision designed to perfectly seal the opening used for filling up the engine oil.

CPC offers a variety of standard and performance oil caps, ranging from metal and plastic standard replacement caps to metal coloured performance oil caps.

Specifications:

• Height: 33mm.
• Outside diameter: 59.5mm.
• Thread diameter: 35mm.

Contents:

• 1 X Engine oil cap

​Vehicle Fitment Guide

Note: Please verify that your engine oil cap matches the dimensions of the one in this listing prior to purchase.

This Mahle regrind gasket set and head bolts combo pack suits Holden Commodores and similar platform fitted with Alloytec LY7 LE0 LCA 3.6L V6 engines. 

This VRS gasket kit has been manufactured by one of the top leaders in OEM and high-performance gaskets. All gaskets included in this kit meet or exceed the original equipment specifications providing the finest sealing products available. 

Head bolts play a vital role in the sealing of the combustion chamber, oil/coolant channels and ambient air. Therefore, we recommend our Mace cylinder head bolt set for the task. Having met and exceeded OEM specifications, these quality bolts are suited for standard and mildly modified applications. These are torque-to-yield (TTY) bolts which means they are designed to be tightened past their elastic limit, guaranteeing high and uniform clamping forces.

Contents:

• 01 X Upper inlet manifold gasket
• 01 X Lower inlet manifold gasket
• 01 X Thermostat housing gasket
• 01 X Thermostat seal
• 02 X Cylinder head gasket
• 02 X Mahle cover gasket
• 02 X Chamber gasket
• 02 X Throttle body gasket
• 02 X Water outlet o-ring
• 02 X Exhaust manifold gasket
• 03 X O-ring
• 04 X Short cylinder head bolt (M8 x 1.25 x 90.5)
• 06 X Spark plug tube seal
• 16 X Long cylinder head bolt (M11 x 2.00 x 152)
• 24 X Mahle stem seal
• 26 X Mahle cover grommet

Vehicle Fitment Guide

Notes:

• This gasket set does not contain fuel injector O-rings. These can be purchased through another listing.
• The bolts provided in this combo pack are enough for one complete engine.
• When torquing up bolts, an accurate torque wrench or angle gauge will be required to achieve correct clamping forces.
• Please follow the torque specifications as recommended by the service manual.
• TTY bolts are only to be utilized once due to permanent elongation and safety concerns.
• This combo pack's components can be purchased separately through other listings.

Inspired and used within NASCAR, these premium Double Platinum and Iridium spark plugs are for the enthusiasts with high performance applications in mind.

The new Autolite plugs ignite more gas and air mixture inside the cylinders to deliver better overall performance. The ignition is also more focused, which provides better and faster fuel combustion, optimizing the vehicles spark plug performance.

Contents:

• 6 X Autolite spark plug

Vehicle Fitment Guide​

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.

Notes:

• You can contact us if you are unsure about fitment.
• Gap the new spark plugs as recommended in the above fitment guide or car owner's manual. Use a feeler gauge to measure the gap between the center and ground electrode. The gauge should pass through snugly but easily. If too lose or too tight, reset the gap.
• The images are for illustrative purposes only.

This Mace manifold gasket and spark plug kit suits Holden vehicles fitted with Alloytec LY7 LE0 LW2 LCA 3.6L V6 engines.

Unfortunately, lifting the intake manifold is necessary to access the spark plugs so this kit has you covered by including a high quality inlet gasket too which, given the age of the car, will mostly likely need to be replaced anyways.

Specifications:

• Gap setting (spark plug): 1.1mm

Contents:

• 1 X Upper manifold gasket
• 6 X Spark plug​

Vehicle Fitment Guide

Notes:

• You can contact us if you are unsure about fitment.
• Gap the new spark plugs as recommended in the above fitment guide or car owner's manual. Use a feeler gauge to measure the gap between the center and ground electrode. The gauge should pass through snugly but easily. If too lose or too tight, reset the gap.
• The images are for illustrative purposes only.

Due to extended exposure to high temperatures, it is very common for the rocker cover gaskets on any motor to eventually become brittle and break. If the problem is left unattended, the engine bay ends up looking like a mess, worst case, engine damage will result due to oil loss.

This Platinum rocker cover gasket kit has been manufactured from high-grade automotive materials to ensure trouble-free motoring for all applications. This can be used with alloy or factory rocker cover of the Alloytec V6 engines.

Contents:

• 1 X Rocker cover gasket kit

Vehicle Fitment Guide

Note: A single RHS or LHS rocker cover gasket kit can be purchased through other listings.

Due to extended exposure to high temperatures, it is very common for the rocker cover gaskets on any motor to eventually become brittle and break. If the problem is left unattended, the engine bay ends up looking like a mess, worst case, engine damage will result due to oil loss.

This Platinum rocker cover gasket kit has been manufactured from high-grade automotive materials to ensure trouble-free motoring for all applications. This can be used with alloy or factory rocker cover of the Alloytec V6 engines.

Contents:

• 1 X RHS Rocker cover gasket​ kit

Vehicle Fitment Guide

Note: A single LHS or complete rocker cover gasket kit can be purchased through other listings.

 Due to extended exposure to high temperatures, it is very common for the rocker cover gaskets on any motor to eventually become brittle and break. If the problem is left unattended, the engine bay ends up looking like a mess, worst case, engine damage will result due to oil loss.

This Platinum rocker cover gasket kit has been manufactured from high-grade automotive materials to ensure trouble-free motoring for all applications. This can be used with alloy or factory rocker cover of the Alloytec V6 engines.

Contents:

• 1 X LHS Rocker cover gasket​ kit

Vehicle Fitment Guide

Note: A single RHS or complete rocker cover gasket kit can be purchased through other listings.

Due to extended exposure to high temperatures, it is very common for the rocker cover gaskets on any motor to eventually become brittle and break. If the problem is left unattended, the engine bay ends up looking like a mess, worst case, engine damage will result due to oil loss.

This Platinum rocker cover gasket set has been manufactured from high-grade automotive materials to ensure trouble-free motoring for all applications. This can be used with alloy or factory rocker cover of the Alloytec V6 engines.

Contents:

• 2 X Rocker cover gasket

Vehicle Fitment Guide

Note: A single RHS or LHS rocker cover gasket can be purchased through other listings.

Due to extended exposure to high temperatures, it is very common for the rocker cover gaskets on any motor to eventually become brittle and break. If the problem is left unattended, the engine bay ends up looking like a mess, worst case, engine damage will result due to oil loss.

This Platinum rocker cover gasket has been manufactured from high-grade automotive materials to ensure trouble-free motoring for all applications. It can be used with factory rocker cover of the Alloytec V6 engine.

Contents:

• 1 X RHS Rocker cover gasket

Vehicle Fitment Guide

Note: A single LHS or complete rocker cover gasket can be purchased through other listings.

Due to extended exposure to high temperatures, it is very common for the rocker cover gaskets on any motor to eventually become brittle and break. If the problem is left unattended, the engine bay ends up looking like a mess, worst case, engine damage will result due to oil loss.

This Platinum rocker cover gasket has been manufactured from high-grade automotive materials to ensure trouble-free motoring for all applications. It can be used with factory rocker cover of the Alloytec V6 engine.

Contents:

• 1 X LHS Rocker cover gasket

Vehicle Fitment Guide

Note: A single RHS or complete rocker cover gasket can be purchased through other listings.