Different radiator caps maintain your vehicle's cooling system at different pressures, altering the boiling point of the coolant so it is vital that the correct radiator cap is used to pressurize the cooling system. CPC radiator caps are expertly designed to maintain optimum pressure and also to prevent coolant loss.

This radiator cap suits Ford Falcon vehicles fitted with Barra & Boss V8 or any other vehicle equipped with the same engine.

Specifications:

• Height: 22 mm.
• Outside diameter: 71.5 mm.
• Thread diameter: 50 mm.
• Pressure rating: 17 PSI, 120 kPa.

Contents:

• 1 X Radiator cap

Vehicle Fitment Guide

Notes:

• Please verify that your radiator cap matches the dimensions of the one in this listing prior to purchase.
• It is recommended that the radiator cap is changed every two years to maintain the optimal performance of the cooling system.

Oil caps should be replaced when they no longer seal properly and allow the oil to seep out from the engine. This CPC standard replacement oil cap has been precision designed to perfectly seal the opening used for filling up the engine oil.

CPC offers a variety of standard and performance oil caps, ranging from metal and plastic standard replacement caps to metal coloured performance oil caps.

Specifications:

• Height: 39mm.

• Outside diameter: 56.5mm X 70mm.

• Thread diameter: 35.5mm.

Contents:

• 1 X Engine oil cap

Vehicle Fitment Guide

Note: Please verify that your engine oil cap matches the dimensions of the one in this listing prior to purchase.

This Mace cylinder head bolt set suits Ford Falcons and similar platforms fitted with Barra 220, 230 and Boss 260, 290 5.4L V8 engines.

Head bolts play a vital role in the sealing of the combustion chamber, oil/coolant channels and ambient air. Therefore, we recommend our Mace cylinder head bolt set for the task. Having met and exceeded OEM specifications, these quality bolts are suited for standard and mildly modified applications. These are torque-to-yield (TTY) bolts which means they are designed to be tightened past their elastic limit, guaranteeing high and uniform clamping forces.

Key Benefits:

• Reduced frictional variations in the bolt up procedure.
• Allowance for uncontrolled slight discrepancies in the final bolt position on fitment.
• Maintenance of constant clamp load during warm up and running conditions.

Specifications:

• M11 X 1.5 X 212mm

Contents:

• 1 X Complete head bolt set

Vehicle Fitment Guide

Notes:

• The image is for illustrative purposes only.
• When up bolts, an accurate torque wrench or angle gauge will be required to achieve correct clamping forces.
• Please follow the torque specifications as recommended by the service manual.
• TTY bolts are only to be used once due to permanent elongation and safety concerns.

Ultima Front brake pad set has been precision designed to provide proper OE braking performance which is perfect for Ford BA to FG series.

These brake pads offer unmatched wear and tear resistance which in turn enables the tyres to provide superior braking regardless of driving style.

Key Features:

• Provision of exceptional heat recovery for durable braking and panic stops.
• Ideal braking for heavier 4WDs.
• Noise proof braking with Positive mold technology.
• Zero asbestos ensures low dust production.
• Up to 400°C temperature tolerance.

Contents:

• 1 X Brake pad set (contains 4 pads to do both wheels)

Vehicle Fitment Guide

Notes:

• The image is for illustrative purposes only.
• These Brake pads won't suit FPV or factory upgraded vehicles which run Brembo brakes, so please be sure about fitment before making a purchase or contact us for further assistance.

Ultima Rear brake pad set has been precision designed to provide proper OE braking performance which is perfect for Ford BA to FG series.

These brake pads offer unmatched wear and tear resistance which in turn enables the tyres to provide superior braking regardless of driving style.

Key Features:

• Provision of exceptional heat recovery for durable braking and panic stops.
• Ideal braking for heavier 4WDs.
• Noise proof braking with Positive mold technology.
• Zero asbestos ensures low dust production.
• Up to 400°C temperature tolerance.

Contents:

• 1 X Brake pad set (contains 4 pads to do both wheels)

Vehicle Fitment Guide

Notes:

• The image is for illustrative purposes only.
• These Brake pads won't suit BF series in Falcon Sedans fitted with a Boss 260 engine.
• These Brake pads won't suit FPV or factory upgraded vehicles, so please be sure about fitment before making a purchase or contact us for further assistance.

This Crow Cams valve spring and retainer set has been manufactured from aircraft quality alloy steel to give the best performance and reliability at a reasonable price.

These beehive valve springs and retainers are especially designed to suit Ford Falcons fitted with Boss 260 V8 engines.

Contents:

•  32 X Valve spring
•  32 X Retainer

Vehicle Fitment Guide

Valve Spring Specifications

Note: Use standard valve locks with this valve spring kit.

This premium valve regrind gasket set and head bolts combo pack suits Ford Falcons fitted with a Boss 260, 290 5.4L V8 engine.

This Mace premium valve regrind gasket set (VRS) is designed to meet and exceed OEM specifications. Each item included has been checked and evaluated, so you can be assured of quality fitment every time.

Head bolts play a vital role in the sealing of the combustion chamber, oil/coolant channels and ambient air. Therefore, we recommend our Mace cylinder head bolt set for the task. Having met and exceeded OEM specifications, these quality bolts are suited for standard and mildly modified applications. These are torque-to-yield (TTY) bolts which means they are designed to be tightened past their elastic limit, guaranteeing high and uniform clamping forces.

Contents:

•  01 X Timing cover gasket and seal set
•  01 X Head bolt set (M11 X 1.5 X 212mm)
•  02 X Head gasket
•  02 X Intake manifold gasket
•  02 X Exhaust manifold gasket
•  02 X Rocker cover gasket
•  32 X Valve stem seal
•  Other required gaskets and seals

Vehicle Fitment Guide

Notes:

• The images are for illustrative purposes only.
• The head bolts included in the pack are enough for one motor.
• When torquing up bolts, an accurate torque wrench or angle gauge will be required to achieve correct clamping forces.
• Please follow the torque specifications as recommended by the service manual.
• TTY bolts are only to be utilized once due to permanent elongation and safety concerns.
• Timing gasket kits and conversion kits can be purchased through other listings.

This Mace standard replacement ignition coil is designed to meet and exceed OEM specifications when it comes to performance and durability. Each ignition coil has been checked and tested so you can be assured of quality fitment every time. This suits a range of Falcons and similar platforms fitted with the Boss 260 290 V8 engines.

This coil comes with a 3 year/100,000km product replacement warranty.

Contents:

• 1 X Ignition coil

Vehicle Fitment Guide

Note: A set of 8 coils can be purchased through another listing.

This set of 8 Mace standard replacement ignition coils are designed to meet and exceed OEM specifications when it comes to performance and durability. Each ignition coil has been checked and tested so you can be assured of quality fitment every time. This set suits a range of Falcons and similar platforms fitted with the Boss 260 290 V8 engines.

These coils come with a 3 year/100,000km product replacement warranty.

Contents:

• 8 X Ignition coil

Vehicle Fitment Guide

Note: A single coil can be purchased through another listing.

Disc brake rotors provide the braking surface for the wheel brake pads and they get worn out quick depending on the driving styles and temperature, so timely replacement of disc rotors is crucial to maintain exceptional braking performance and safety.

Ultima Front disc brake rotors have been precision manufactured to provide OE quality braking which is perfect for Ford BA to BF series. These disc brake rotors offer unmatched wear and tear resistance which in turn enables the tyres to provide superior braking regardless of driving style.

Contents:

• 2 X Disc brake rotor (298mm vented)

Vehicle Fitment Guide

Notes:

• The image is for illustrative purposes only.
• These Disc brake rotors won't suit FPV or factory upgraded vehicles, so please be sure about fitment before making a purchase or contact us for further assistance.